What to do if my Air Lift Performance Automobile Accessories compressor doesn’t run?
If your Air Lift Performance Automobile Accessories compressor isn't running, start by checking the fuse (30A or 3A) and replacing it if it's blown. Make sure the ground wire connection at both the battery and compressor is secure. If the motor overheated, give it about 30 minutes to cool down so the thermal overload switch can reset.
Critical safety warnings and precautions for operating the air suspension system.
Verify height sensor range for accurate system performance.
Configure compressor ON/OFF, dual/single, max pressure, duty cycle, voltage, and reset.
Detailed explanation of auto and manual height sensor limit calibration.
General| Control Type | Height + Pressure |
|---|---|
| Product Type | Air Suspension Control System |
| Height Sensors | Yes |
| Pressure Sensors | Yes |
| Mobile App Control | Yes |
| Compatibility | Universal |
| Pressure Range | 0-200 psi |
| Voltage | 12V |
| Warranty | 1 Year |
| Manifold | Integrated |
| Presets | 5 user-defined |
| Display | LCD |
To Next Page
