What to do if manifold valves do not operate in Air Lift Performance 3S?
If the manifold valves on your Air Lift Performance Control Systems aren't working, the tank pressure might be too low. Make sure the tank pressure is greater than 50 PSI (3.4BAR).
Why the display does not light up on Air Lift Performance 3S?
If the display on your Air Lift Performance Control Systems doesn't light up, it might be due to a blown fuse or a poor connection. Replace the fuses and check the electrical connections to resolve this.
What to do if nothing happens when the vehicle is key-on ignition active in Air Lift Performance Control Systems?
If nothing happens when the vehicle is key-on ignition active with your Air Lift Performance Control Systems, it could be due to a blown fuse or a poor connection. Try replacing the fuses and checking the electrical connections.
Crucial safety warnings and precautions for operating the Air Lift Performance 3S system.
Steps for pairing the 3S manifold with a mobile device via Bluetooth.
Explains how to control air pressure and activate presets within the smartphone app interface.
Guide on how to adjust valve open times to create custom presets in the app.
Explains the layout and functions of the ALP3 display for system control.
Explains the manual operation mode and display standby for the APV2 controller.
Lists common problems like no power or display issues and their corresponding causes and solutions.
General| Compatibility | Universal |
|---|---|
| Wireless Control | Yes |
| Mobile App | Yes |
| Pressure Control | Yes |
| Microprocessor | Yes |
| Manifold Valve Control | Integrated |
| Control System | 3S |
| Number of Channels | 4 |
| Power Supply | 12V DC |
| Height Sensors | Optional |
| Product Type | Air Suspension Management |
| ECU | Integrated |
To Next Page
