To Next PageTo Next Page
Need help?Do you have a question about the Air Lift Load controller II 25804 and is the answer not in the manual?
General| Brand | Air Lift |
|---|---|
| Model | Load controller II 25804 |
| Category | Controller |
| Language | English |
Discusses Gross Vehicle Weight Rating (GVWR) and payload limits for safe operation.
Defines hazard symbols (DANGER, WARNING, CAUTION) and notes used in the manual.
Advises against adjusting pre-tested gauge panel fittings to prevent leaks or warranty voidance.
Instructions for securely mounting the compressor, keeping it protected from elements and heat.
Advise to locate the compressor in a dry, protected area, away from direct splash or excessive moisture.
Select a sturdy location, mark, drill, and secure the gauge panel using provided screws.
Connect air lines to compressor and shocks using fittings, ensuring a secure, leak-free connection.
Connect power, ground, and switch wires to the compressor and vehicle's fuse box for operation.
Guidance on inflating/deflating air springs, maintaining pressure, and compressor cooling intervals.
Procedure to check air line connections for leaks using soapy solution after inflating the system.
Addresses compressor not running, air leaks, and loss of pressure, with suggested solutions.
Details what the warranty covers, including defects in workmanship and materials.
Lists conditions and causes that void the warranty, such as improper installation or abuse.
Provides instructions for obtaining warranty service, including contacting customer service for an RMA.
Information on contacting customer service for replacement parts or technical assistance.
Provides phone numbers, mailing address, and email for customer support and inquiries.
