2210200496L41 1904V004 25
Usage
i Inserting the cushion holder�
i Insert new cushions in the cutout provided on
the head supports�
Inserting the positioning aid for CBCT im-
ages
We recommend using the mounting for the bite
block on CBCT images� The bite block can be
used optionally in addition to this�
In the case of edentulous patients, the chin sup-
port for edentulous patients can be used�
The other positioning aids can be used depend-
ing on the application scenario�
7.3 Inserting the positioning aids
For the acquisition of the X-ray image, the pa-
tient is positioned in the unit using the corre-
sponding positioning aids and then accurately
aligned using the positioning beams�
WARNING
Danger due to non-reprocessed
products
Risk of infection for operator and patient
i Reprocess the product correctly and
sterilize it as required prior to the first
use and after every subsequent use�
i Do not reprocess disposable items�
Inserting the head supports
If no head supports are inserted or if they are
dirty, insert new head supports before position-
ing the patient�
i Remove any dirty head supports by pulling
them out�
i Insert new head supports�
When doing this, make sure that the cushions
of the head supports face inwards�
Inserting the cushions of the head supports
If no cushions are inserted in the head supports
or if they are dirty, insert new cushions before
you position the patient�
i Remove any dirty cushions by pulling them
out�
EN
US
OBJ_DOKU-0000003575-mehrere-005.indd 25 17.04.2019 14:28:59
To Next Page
