Customer : CSN
Type : A318/A319/A320/A321
Rev. Date : May 01, 2018
Manual : AMM
Selected applicability : 0053-0053
29-11-52-000-001-A - Removal of the Engine Pump Fire-Valve
Print Date: August 16, 2018 Page 1 of 6
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
** ON A/C ALL
TASK 29-11-52-000-001-A
Removal of the Engine Pump Fire-Valve
WARNING: PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND THE RELATED DOORS
- COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR CAN
CAUSE DAMAGE TO THE EQUIPMENT.
WARNING: MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
GEAR. THIS WILL PREVENT UNWANTED MOVEMENT OF THE LANDING GEAR, AND THUS
POSSIBLE INJURY TO PERSONS AND DAMAGE TO THE AIRCRAFT AND/OR EQUIPMENT.
FIN : 1046GK
1. Reason for the Job
Self explanatory
2 Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
REFERENCE QTY DESIGNATION
No specific 1 ACCESS PLATFORM 3M (10 FT)
No specific AR CAP - BLANKING
No specific 1 CONTAINER 1 L (1/4 USGAL)
No specific AR PLUG - BLANKING
No specific AR SAFETY BARRIER(S)
No specific AR SAFETY CLIP - CIRCUIT BREAKER
No specific 1 WARNING NOTICE(S)
B. Consumable Materials
REFERENCE DESIGNATION
(Material No. 14SBA1) Textile-Lint free Cotton -
C. Work Zones and Access Panels
ZONE/ACCESS ZONE DESCRIPTION
574AB, 574BB
D. Referenced Information
REFERENCE DESIGNATION
(Ref. 29-00-00-864-001-A). Put the Related Hydraulic System in the Depressurized Configuration
before Maintenance Action
To Next Page
Need help?
General
