Airbus AMM User Manual

Customer : CSN
Type : A318/A319/A320/A321
Rev. Date : May 01, 2018
Manual : AMM
Selected applicability : 0317-0317
71-11-11-300-014-A - Repair the Aerodynamic
Sealant on the Air Intake Cowl or the P2/T2 Sensor
Print Date: July 02, 2018 Page 1 of 7
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
** ON A/C 0001-0004, 0007-0050, 0101-0107, 0109-0115, 0126-0150, 0204-0204, 0207-0207, 0209-0249, 0301-
0350, 0401-0449, 0501-0549, 0651-0749, 0751-0799, 0901-0970
TASK 71-11-11-300-014-A
Repair the Aerodynamic Sealant on the Air Intake Cowl or the P2/T2 Sensor
WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL
MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
1. Reason for the Job
Self explanatory
2 Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
REFERENCE QTY DESIGNATION
No specific AR ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE
No specific AR GUN - SEALANT
No specific AR SPATULA - PLASTIC
No specific AR WARNING NOTICE(S)
B. Consumable Materials
REFERENCE DESIGNATION
(Material No. V01-076) Methyl Ethyl Ketone, Technical grade
(Material No. V02-007) teflon tape
(Material No. V05-020) waterproof silicon carbide
(Material No. V06-131) marking pen
(Material No. V08-141) sealant
(Material No. V08-146) sealant
No specific lint free cloth
No specific strip
C. Referenced Information
REFERENCE DESIGNATION
(Ref. 70-30-00-918-010-A). Consumable Materials Index
Aerodynamic Sealant Replacement

Airbus AMM Specifications

General

Brand	Airbus
Model	AMM
Category	Aircrafts
Language	English

Summary

Reason for the Job

Job Set-up Information

Fixtures, Tools, Test and Support Equipment

Lists necessary fixtures, tools, and support equipment for the repair.

Consumable Materials

Lists all consumable materials required for the task.

Referenced Information

References other documents or indices relevant to the task.

Job Set-up

Safety Precautions

Details critical safety measures to be observed before starting the procedure.

Clean the repair area

Instructions for cleaning the designated repair area.

Prepare the aerodynamic sealant

Steps for preparing the sealant material before application.

Mix the sealant

Procedure for mixing the aerodynamic sealant components.

Apply the aerodynamic sealant

Instructions for applying the mixed sealant to the repair area.

Visual examination of the sealant repair

Guidance on visually inspecting the completed sealant repair.

Identify the repair scheme number on the cowl

Procedure for marking the repair scheme number on the aircraft cowl.

Close-up

Close Access

Steps to close out the work area after completing the task.