EasyManua.ls Logo

Aircast VenaFlow Elite User Manual

Aircast VenaFlow Elite
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator’s Manual
Prophylaxis for Deep Vein Thrombosis for use in a clinical setting or in the home

Other manuals for Aircast VenaFlow Elite

Question and Answer IconNeed help?

Do you have a question about the Aircast VenaFlow Elite and is the answer not in the manual?

Aircast VenaFlow Elite Specifications

General IconGeneral
Pneumatic CompressionYes
Gradient Sequential CompressionYes
Power Supply100-240 VAC, 50/60 Hz
Power SourceAC Adapter or Battery
AlarmsLow Battery
Battery LifeUp to 8 hours
IndicationDeep Vein Thrombosis (DVT) prophylaxis, Lymphedema management, Venous insufficiency

Summary

Design Philosophy

Function

Explains the rapid inflation and alternating cycle of the VenaFlow Elite system.

S Mode Operation

Describes the slower inflation mode, simultaneous inflation, and pressure settings.

Intended Use/Indications

Contraindications

Lists conditions and situations where the VenaFlow Elite System should not be used.

Warnings and Precautions

Details important safety guidelines, precautions for use, and patient considerations.

Latex Information

States that all components of the VenaFlow Elite System are latex-free.

Pump Features

Key components overview

Overview of graphical display, indicator lights, and patient compliance counter.

Symbol Definitions

Operational and safety symbols

Defines key symbols for operation, alarms, modes, and safety classification.

Pump Set-Up

Setup procedures

Steps for connecting the pump, tubes, and power cord for operation.

Cuff Application

Applying and connecting cuffs

Instructions for applying calf, foot, thigh cuffs and connecting to tubing.

Pump Operation

System operation basics

Turning on/off, cuff detection, and mode selection.

Locking the System

Mode locking procedure

Procedures to lock the system in S mode or standard rapid mode.

Tube Alarm

Troubleshooting tube issues

How to identify, troubleshoot, and resolve tube alarms.

Enabling Compliance Alarm

Setting up compliance alarm

Detailed steps to enable the compliance alarm feature on the device.

Alarms and Battery Info

Compliance, Service, and Battery Alarms

Explains alarms for compliance, service, and low battery status.

Battery Operation and Charging

Information on battery use, charging instructions, and operation.

Lithium-Ion Battery Maintenance

Care and storage guidelines

Guidelines on battery lifespan, maintenance checks, and proper storage.

Battery Handling and Alarms

Handling precautions and low battery alarm

Safety precautions for battery handling and details on low battery alarms.

Installing or Replacing the Battery

Battery replacement procedure

Step-by-step instructions for installing or replacing the system's battery.

Replacement Kit Instructions

Component replacement

Instructions for replacing power cord, bed hanger, and fuses.

Maintenance and Testing

Cleaning, Disposal, Warranty, Testing

Covers cleaning, disposal, warranty, and optional tube alarm verification test.

Ordering Information

Product and part numbers

Lists part numbers for systems, accessories, and replacement parts.

Specifications and Support

Technical specs and operating conditions

Details on device specifications, environmental conditions, and operating parameters.

Customer support information

Contact details for service and technical support.

Related product manuals