Need help?Do you have a question about the Aircat 6340 and is the answer not in the manual?
General| Wheel Diameter | 4 inches |
|---|---|
| Air Consumption | 4 CFM |
| Air Inlet | 1/4 inch NPT |
| Exhaust | Rear |
| Type | Angle Grinder |
| Spindle Thread | 5/8-11 |
Hazards from high velocity projectiles generated by tool or accessory failure.
Risks of entanglement with neckwear, hair, or gloves near tool.
Hazards during operation including crushing, impact, cuts, and abrasions.
Discomfort from repetitive motions and symptoms to watch for.
Risks associated with using incorrect accessory sizes or types.
Hazards like slips, trips, falls, and hidden utilities in the workplace.
Health risks from dust and fumes, and control measures.
Risks of hearing loss from high noise levels and control measures.
Damage from vibration exposure and ways to minimize risk.
Hazards related to air pressure, hoses, and connections.
Key warnings for operating grinders, including wheel jamming, speed, and guards.
Mandatory PPE requirements for operating grinders.
Product warnings regarding lead and other chemicals.
Technical details including speed, motor, size, weight, and air consumption.
Recommended air pressure, hose size, and connection details for optimal performance.
Visual representation of the grinder's components.
Detailed list of all parts with reference numbers and descriptions.
Addressing factors causing loss of power or erratic action and cleaning procedures.
Guidelines for tool lubrication using in-line lubricators and for storage.
Details of the 2-year warranty, exclusions, and repair policies.
Instructions for returning tools and information on authorized service centers.
To Next Page