Need help?Do you have a question about the Aircat 6280 and is the answer not in the manual?
Read and understand safety instructions before installing, operating, or maintaining the tool. Only trained operators should use the tool.
Wear impact-resistant eye protection during operation to guard against high velocity projectiles from tool or workpiece failure.
Keep neckwear, hair, and gloves away from tool and accessories to prevent choking, scalping, or lacerations.
Use gloves to protect hands from crushing, impacts, cuts, abrasions, and heat. Hold tool correctly with both hands.
Position body comfortably, maintain secure footing, and change posture to avoid discomfort or fatigue from tool use.
Use only sizes and types of accessories recommended by the power tool manufacturer to prevent hazards.
Be aware of slippery surfaces, trip hazards from hoses, and hidden hazards like utility lines. Not for explosive atmospheres.
Dust or fumes can cause cancer, birth defects, or respiratory diseases. Assess risks and use controls and respiratory protection.
Unprotected exposure to high noise levels can cause permanent hearing loss. Use hearing protection as instructed.
Vibration can cause nerve and blood supply damage. Stop use if symptoms occur and seek medical advice.
Air under pressure can cause injury. Never direct air at others. Check hoses for damage. Use whip check safety cables.
Follow specific warnings for stopping time, workpiece support, jammed wheels, side grinding, bystanders, and guards.
Use only specified accessories, correct mounting flanges, and ensure wheels meet ANSI/ISO standards.
Always wear eye protection, hearing protection, safety gloves, and safety aprons when operating the grinder.
Provides key specifications for the Angle Die Grinder, including model number, speed, motor, collet size, and air consumption.
Recommends 90 PSI air pressure, proper hose diameter, and regular maintenance of air supply components for optimal tool life.
Visual representation and a detailed list of all parts for the Model 6280 Angle Die Grinder, including part numbers and quantities.
Addresses factors affecting performance, cleaning procedures, and recommended actions for out-of-warranty repairs.
Details the importance of lubrication, recommended lubricants, and procedures for regular and storage lubrication.
Covers the 2-year warranty for defects in material/workmanship, exclusions, and conditions for warranty claims.
Instructions on how to return tools for warranty service, including required documentation and authorized service centers.
To Next Page
General