Need help?Do you have a question about the AirLive P-201 and is the answer not in the manual?
Guides users through installing the print server driver and utilities.
Explains how to add or remove print server ports from client computers.
Provides steps to add a printer in Windows after print server installation.
Guides the installation and setup for Windows NT/2000/2003 servers.
Explains how client users install and set up the print server in a Windows network.
Provides instructions for installing and setting up the print server with NetWare 3.x/4.x/5.x.
Details the process of installing the print server using the PCONSOLE utility.
Explains how to enable TCP/IP support on the print server for UNIX.
Guides on setting up the print server's IP address for UNIX systems.
Guides on configuring remote LPD printing for UNIX hosts.
Guides on accessing and performing initial setup for the print server.
Details how to configure TCP/IP settings, including DHCP and static IP.
Explains how to configure NetWare settings for the print server.
Guides on setting up AppleTalk protocol for the print server.
Covers system-level settings, protocol enablement, and firmware upgrades.
Guides users through the print server setup process using a wizard.
Details the login procedure for accessing the web management interface.
Introduces the web-based setup wizard for configuring the print server.
Explains how to change the administrator username and password.
Details TCP/IP configuration through the web interface.
Guides on upgrading the print server firmware.
Guides users through installing the print server driver and utilities.
Explains how to add or remove print server ports from client computers.
Provides steps to add a printer in Windows after print server installation.
Guides the installation and setup for Windows NT/2000/2003 servers.
Explains how client users install and set up the print server in a Windows network.
Provides instructions for installing and setting up the print server with NetWare 3.x/4.x/5.x.
Details the process of installing the print server using the PCONSOLE utility.
Explains how to enable TCP/IP support on the print server for UNIX.
Guides on setting up the print server's IP address for UNIX systems.
Guides on configuring remote LPD printing for UNIX hosts.
Guides on accessing and performing initial setup for the print server.
Details how to configure TCP/IP settings, including DHCP and static IP.
Explains how to configure NetWare settings for the print server.
Guides on setting up AppleTalk protocol for the print server.
Covers system-level settings, protocol enablement, and firmware upgrades.
Guides users through the print server setup process using a wizard.
Details the login procedure for accessing the web management interface.
Introduces the web-based setup wizard for configuring the print server.
Explains how to change the administrator username and password.
Details TCP/IP configuration through the web interface.
Guides on upgrading the print server firmware.
General| Print Server Type | External |
|---|---|
| Connectivity Technology | Wired |
| Network Protocols | TCP/IP, IPX/SPX, NetBEUI, AppleTalk |
| Ports | 1 x Parallel Port |
| Supported Operating Systems | Windows 98/ME/NT/2000/XP, Mac OS, Linux, Unix |
| Supported Printers | Any parallel port printer |
| Parallel Port | IEEE 1284 |
| Management | Web-based |
| Power Supply | External power adapter (5V DC) |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% non-condensing |
To Next Page
