System Operation
Select a parameter to be changed.
Confirm a changed parameter.
Scrolls down through menu screens and options
Decrease the value of selected parameter.
4.2 Navigating Menus
The user interface is broken down into main menus and program menus. Main menus are accessed through
the main screen, while program menus are accessed through the program menu selection screen. Please note
the following when navigating the menus:
The current position in the menu is marked by a blinking cursor.
• When the cursor is in the top left corner of the screen, press Up or Down to navigate to different menu
screens.
• To enter a menu screen, press Enter.
• When inside the menu screen, press Enter to scroll through the different parameters.
• After the desired parameter is selected, press Up or Down until the desired setting is selected and press
Enter to confirm.
• To exit a menu screen, press Enter until the cursor is in the top left corner. The Up and Down buttons can
then be used to navigate to different menu screens.
4.3 Main Screen
The Main Screen is displayed by default upon system startup. It can also be accessed from any point by
holding the Esc button.
Figure 4-2 Main Screen
To Next Page
Loading...
