Airthereal B50 - Operation; Plugging In the Unit; Turning On and Adjusting Output; Turning Off the Unit

OPERATION
1. With the CONTROL
KNOB in the ‘Off’
position, plug the
unit into a wall outlet.
2. Rotate the CONTROL KNOB clockwise until it clicks into the
‘On’ position. This position provides the minimum output of
purification. Turning the CONTROL KNOB clockwise will
gradually increase the purification output of the unit.
3. Adjust the CONTROL KNOB to the desired setting. Optimum
performance levels are eached when the space smells fresh
and clean, with no pollution odors and no strong purification
odor.
4. To turn the unit off, turn the CONTROL KNOB counter-
clockwise until it clicks into the ‘Off’ position.