its hub functionality whenever it is only powered by
batteries.
I set my View to the wrong region. What should I do?
Please contact customer support to have it manually reset.
After a region reset, any Wave devices must be unlinked
and the View unpaired from your account before starting
the setup over again.
Display My display is ickering at times
This is normal, and is an eect of the display technology
used.
My View is without power and batteries, but the display is
still showing.
This is normal, and is an eect of the display technology
used.
My display is showing dierent values than those shown in
the App.
The App can sometimes take longer to update than the
display, especially if the device is powered by batteries.
Noise from the
device
My View will sometimes make a slight fan noise, is this
normal?
View Plus and View Pollution uses a particle sensor with a
small fan, which can sometimes be heard if held close to
the ear or in a particularly quiet room.
COMMON QUESTIONS
What is the range of the View when used as a hub?
The View will typically be able to reach linked Airthings devices anywhere in most homes. Tests
show that in most cases the range should be more than enough for a large family home.
Range may vary
depending on wall and oor materials, wireless interference, placement, and other factors.
How many devices can be connected to a View used as a hub?
The View can support up to 10 devices being connected to it.
To Next Page
Loading...
