Have any questions or comments that we didn’t get to here? Please let us know! support.airthings.com
Congratulations on taking this important step toward living a healthier life.
By keeping track of your indoor air quality levels, you can make healthier decisions in the spaces where you spend most of your time.
The Airthings Wave Mini provides you with detailed information about airborne chemicals, temperature and humidity levels on your phone, Airthings Dashboard or by simply waving in front
of the device for a visual indication of your air quality levels—green is good, yellow is warning and red is danger.
Breathe better, live better,
The Airthings team
Features and content
1. Glow signal
2. Wave sensor
3. Battery compartments (observe polarity symbols)
4. One-time battery tab
5. Individual serial number
6. Device stand
7. 3 AA batteries, inserted
Glow signal
Visual indication of your air quality levels.
Green: Good
Yellow: Fair
Red: Poor
(Go to airthings.com/mylevels for more information on air quality action levels)
Wave sensor
Simply wave in front of your detector to activate the glow signal.
Easy to install
Simply use the stand to place the device on a flat surface. Alternatively, you can fix the mounting bracket to the ceiling or wall using a screw. When finding a screw, make sure to use the
appropriate screw for your wall type. The screw must have a low clearance height on the head for the device to attach easily to the base. Thanks to the built-in magnet, simply snap the unit
onto the mounted bracket once you have installed it to the wall.
Do not place the device close to vents or windows. Minimum 1 meter / 3 feet distance.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
