AirTurn BT-106 Digit - User Manual

Quick Start Guide
2. Turn on the BT-106
3. Turn on Bluetooth
Press and hold the power button until
the LED ashes green.
Look for the Bluetooth settings in your
tablet or computer and make sure that
it is set to “ON”.
Visit the AirTurn
website to see a
list of apps for iPad,
iPhone, Android,
Mac and PC that
work with the Air-
Turn BT-106.
1. Select a Compatible App
The AirTurn BT-106 should appear under
the list of Bluetooth devices. Follow
prompts for adding a Bluetooth device if
your tablet or computer requires it. Tap or
click on the AirTurn BT-106 serial number
to connect. If your tablet or computer
prompts you to conrm a passcode, select
“OK” or “YES” to nish the pairing.
4. Select the AirTurn BT-106
For BT-106 Products including DIGIT, DUO, QUAD, TAP and StompKits
www.AirTurn.com/apps

Summary

Select a Compatible App

Find Compatible Apps

Check the AirTurn website for a list of compatible apps for various devices.

Turn On the BT-106

Powering On the BT-106

Press and hold the power button until the LED flashes green to turn on the device.

Turn On Bluetooth

Enable Bluetooth on Device

Ensure Bluetooth is set to 'ON' in your tablet or computer's settings.

Select the AirTurn BT-106

Connect to AirTurn BT-106

Tap or click the AirTurn BT-106 serial number to connect and finish pairing.

Resetting the BT-106

Resetting Device Pairing

Delete device from host, reset BT-106, and re-pair for connectivity issues.

Changing the BT-106 MODE

Switching BT-106 Modes

Change modes by holding the MODE button to match the desired mode number (1-6).

AirTurn BT-106 Digit Specifications

General

Model	BT-106 Digit
Connectivity	Bluetooth
Battery Life	100 hours
Power Source	Rechargeable Battery
Number of Footswitches	2
Compatibility	iOS, Android, Mac, PC