To Next PageTo Next PageWhat to do if my Airwell AW-MFH012-C41 is not cool enough?
If your Airwell Air Conditioner isn't cooling enough, ensure all windows and doors are closed to prevent heat from entering. Remove any heat sources from the room. Check that the exhaust air duct is properly connected and unblocked. If the temperature setting is too high, decrease it. Lastly, clean the air filter if it's blocked by dust.
How to fix Airwell AW-MFH012-C41 that does not start?
If your Airwell Air Conditioner does not start when pressing the on/off button and 'P1' appears on the display, it indicates that you need to drain the water in the bottom tray. If the room temperature is lower than the set temperature in cooling mode, reset the temperature.
Why does my Airwell AW-MFH012-C41 power shut off at Heating mode?
If your Airwell Air Conditioner shuts off in heating mode, it's likely due to the automatic overheat protection function. Allow the unit to cool down before switching it on again.
What is the gurgling sound in my Airwell AW-MFH012-C41 Air Conditioner?
The gurgling sound you hear in your Airwell Air Conditioner is normal. It comes from the flowing of the refrigerant inside the unit.
General| Brand | Airwell |
|---|---|
| Model | AW-MFH012-C41 |
| Category | Air Conditioner |
| Language | English |
General guidelines and warnings for safe operation and handling.
Specifies the recommended temperature ranges for different operating modes.
Details and lists all included parts and accessories with their quantities.
Identifies and labels the different components of the unit with numbers.
Explains how to use the electronic control panel and its functions.
Instructions for operating the unit in cooling mode.
Instructions for operating the unit in heating mode.
Guidance on using the automatic mode for cooling, heating, or fan operation.
Details on using the unit solely for fan circulation.
How to set the auto start and auto stop timer functions.
Explains the sleep mode for energy saving and comfort.
Instructions on how to adjust the airflow direction using the louvers.
Guidance on selecting a suitable and safe placement for the unit.
Steps and considerations for installing the window slider kit.
Specific instructions for installing the window kit in double-hung windows.
Specific instructions for installing the window kit in sliding sash windows.
Procedure for connecting and installing the exhaust hose.
Instructions on setting up drainage for dehumidifying and heating modes.
Steps for removing, cleaning, and reinstalling the air filters.
How to clean the exterior casing of the air conditioner.
Procedures for preparing the unit for storage or long periods of non-use.
Identifies causes and solutions for the unit failing to start.
Addresses issues where the unit is not cooling effectively.
Solutions for excessive noise or vibration from the unit.
Explains the cause of gurgling sounds and whether it's normal.
Troubleshooting for the unit shutting off during heating operation.
