To Next PageTo Next Page
Need help?Do you have a question about the Airwell AW-DDV009-N11 and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 9000 BTU/h |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Indoor) | 38 dB(A) |
| Noise Level (Outdoor) | 50 dB |
| Heating Capacity | 9500 BTU/h |
| Refrigerant | R410A |
Key warnings regarding installation, maintenance, and operation to prevent hazards.
Guidance on proper grounding, circuit breakers, and electrical connections for safety.
Instructions for safe operation, avoiding hazards like anoxic injury, fire, and unit damage.
Lists common operational sounds and smells and their potential causes.
Steps to check for unit failure, improper operation, or poor performance.
Guidelines for selecting suitable and avoiding unsuitable locations for indoor units.
Detailed steps for mounting the indoor unit, cutting holes, and securing pipes.
Technical specifications for unit dimensions across different models.
Explanation of different air return modes for indoor unit installation.
Requirements for ceiling, reinforcement, and pipe/wire routing during installation.
Guidance on installing air inlet grilles and duct pipes for proper airflow.
Instructions for connecting the drain hose and performing a drainage system test.
Details on pipe length, materials, refrigerant recharge, and connection procedures.
Illustrations showing power supply connections for outdoor and indoor units.
Diagrams illustrating communication and control wiring between units.
Explanation of dipswitch settings and PCB configurations for unit control.
Details on function switches and settings for wired controllers.
Essential checks before powering on the unit for the first time.
Procedures for conducting the unit's test run and checking its operation.
List of fault codes, indicators, and descriptions for troubleshooting.
