Need help?Do you have a question about the Airwell CAO 230 and is the answer not in the manual?
General| Brand | Airwell |
|---|---|
| Model | CAO 230 |
| Category | Air Conditioner |
| Language | English |
Offers individual environment control for low cost installation.
Suitable for decentralized installations, especially those without outdoor openings.
Design, sound level, small dimensions, easy installation, and accessories.
Combines technical data with aesthetic appearance and small dimensions.
Two-tone body, dual-speed fan, adjustable discharge, and control options.
Describes the unit's exterior panels and materials.
Covers acoustic and thermal insulation properties.
Details the hermetic compressor, capillary tube, and condenser.
Describes centrifugal fans, silent motor, and condensate tray assembly.
Details rapid removal cassette air filters and regeneration methods.
Mentions optional electrical heaters with temperature limit control.
Explains integrated control panel functions and remote control options.
Important notes for maintenance, especially regarding R22.
Advises consulting corresponding instructions for R22.
Lists electrical diagrams, installation, and operation instructions.
Mentions technical data and maintenance guides available upon request.
Details refrigerant type (R-407C) and nominal cooling capacity.
Specifies air flow rates at different speeds and sound pressure levels.
Outlines voltage range, absorbed power for fan and cooling.
Lists water flow rates and pressure drops for different conditions.
Provides width, depth, height, and net/packed weight for models.
Lists available accessories like electrical heating and remote control.
Graphical representation of cooling performance with wasted water.
Formula and coefficient for calculating hourly water consumption.
Details power consumption based on temperature and model.
Specifies temperature and water limits for safe operation.
Graphical representation of cooling performance with recycled water.
Coefficient for calculating water flow with recycled water.
Coefficient for water flow based on temperature difference (ATw).
Specifies temperature and water limits for recycled water operation.
Graph showing pressure drop versus water flow rate.
Table of nominal water flow and pressure drops for models.
Minimum and maximum water capacity values.
Specifies the adjustment setting for the pressure valve.
Details flexible tube connections for condenser and condensate.
Instructions for condensate evacuation and insulation.
Describes thermal protection and safety cut-off for heaters.
Specifies total capacity for different models (2000W, 3000W).
Explains regulation by internal or remote thermostat.
Details cassette type, synthetic fabric media, and fire resistance.
Specifies gravimetric efficiency, access, and fixing methods.
Describes washable filters and dry dedusting methods.
Describes the functions of the integrated control panel elements.
Explains the connection and functions of the remote control.
Details wiring for the main power supply to the unit.
Explains the fixed wiring for the remote control cable.
Provides electrical data like voltage, current, fuse ratings, and cable sizes.
Shows overall unit dimensions with a diagram.
Specifies minimum required clearances around the unit.
Diagrams and measurements for electrical and hydraulic connection holes.
Critical warning to avoid partial air recycling.
Specifies requirements for a heavy, plane, and rigid support.
Mentions clearance requirements and adhesive support pads.
Illustrates different vertical and horizontal air discharge configurations.
Identifies major components like motor, evaporator, compressor, and condenser.
To Next Page