Revised 02.19.10 www.AIS-INC.com 26
AIS DiVi Installation Instructions (P-DVINSTRUCT01)
Note, pole is 3 sided. When
using as a aesthetic “filler”,
turn 3
rd
side towards inside.
Note that all sides of pole have
“hinge channels” for
installation to panels. Install
hinges on both sides of the
post filler.
Slide first the 20 7/8 inch long
hinge down into hinge
channels and then the second
hinge size based on panel
height (see table page 2).
Line bottom edge of post filler
cover with bottom section of
post filler body. Snap the cover
in place on the power pole.
To Next Page
Loading...