AIS Divi User Manual

Revised 02.19.10 www.AIS-INC.com 1
AIS DiVi Installation Instructions (P-DVINSTRUCT01)
Indentify Non-powered panels
and separate from Powered
panels. Non-powered panel
shown at left..
Powered panel shown at left
has powerway mounted at
factory. Also separate panels
by surface type, width and
height.
Polypropylene hinges are used
to connect panels together.

AIS Divi Specifications

General

Brand	AIS
Model	Divi
Category	Indoor Furnishing
Language	English

Summary

Panel Assembly and Connection

Panel Identification and Hinge Preparation

Distinguish between powered and non-powered panels and understand hinge types.

Hinge Installation Procedures

Steps for interlocking panels and installing hinges into channels.

Connecting Panels at Various Angles

Guidelines for creating 2-way, 3-way, 4-way, and HILO panel connections.

Finishing Panel Edges and Topcaps

Instructions for corner panels and installing hanger frame topcaps.

Power and Cable Management

Electrical Outlet and Jumper Installation

Installing electrical outlets and jumpers into the powerway system.

Metal Raceway and Divider Setup

Installing metal raceway dividers for cable management.

Base Cover Installation and Shrouds

Attaching base covers and raceway shrouds to the panels.

Power Poles and Workstation Accessories

Power Pole Assembly and Mounting

Steps for assembling and attaching power poles to panels.

Shelf and Tackboard Installation

Installing shelves, tackboards, and task light brackets.

Countertop Bracket Attachment

Installing brackets for countertop support.

Countertops and Final Assembly

Countertop and Pedestal Installation

Mounting countertops and aligning pedestals.

Drawer and Grommet Cover Installation

Reinserting drawers and installing grommet covers.

Completed Workstation Overview

Final view of the completed workstation configuration.