Revised 02.19.10 www.AIS-INC.com 31
AIS DiVi Installation Instructions (P-DVINSTRUCT01)
Install powerpole retaining
bracket by inserting into the
hanger frame slot and
engaging DOWN. Note that
teeth are universal and bracket
is non-handed.
Install 1 bracket facing in on
left such that the threaded stud
on the bracket is at the same
height as the uppermost set of
punches on the lower
powerpole section.
Install 1 bracket facing in on
right such that the threaded
stud on the bracket is at the
same height as the uppermost
set of punches on the lower
powerpole section.
To Next Page
Loading...