AIS Divi - Page 30

Revised 02.19.10 www.AIS-INC.com 30
AIS DiVi Installation Instructions (P-DVINSTRUCT01)
Note pole has multiple sets of
rectangular punchouts.
Knockout bottom set as
shown. DO NOT KNOCK
OUT PUNCHOUTS ON THE
SECOND SECTION OF POLE
THAT WILL BE USED FOR
THE TOP.
Knocked out holes for bottom
section.
Knock out top set of punches
only if installing on a 66 high
panel. Knock out second set
down only if installing on a 50
high panel. Knockout 3
rd
set
down only if installing on a 42
high panel.