Revised 02.19.10 www.AIS-INC.com 29
AIS DiVi Installation Instructions (P-DVINSTRUCT01)
Line up the lower edge of the
upper power pole cover with
the top edge of the lower
cover.
Place on edge in the power
pole and rotate the cover into
position, snapping it in place.
Make sure all seams are as
even as possible on the
completed power pole.
The pole comes in two
sections. Either section can
be used for top or bottom.
Make sure the opening of the
lower section is at the bottom
of the power pole when
installed.
To Next Page
Loading...