area on the device to connect. The Bluetooth indicator light staying
on indicates a successful connection.
Instruction for use
* USB connection
Connect the device to computer via type-C USB data cable and you will
hear a prompt tone when connected.Choose “AIMIC-M6 Pro” as input
/output audio device in system setting or in the online meeting software.
Tip:This device does not suppo direct connection to the phone using an
OTG data cable.
2）Computer connection
After powering on device and activating Bluetooth, then open the
Bluetooth settings page on your computer system. Select this device
to pair and connect. The device's Bluetooth indicator light staying on
indicates a successful connection.
3）Bluetooth Dongle connection
Plug in the Bluetooth dongle into the PC, conference host, or con-
ference display. After powering on the device activating Bluetooth
function,then open the Bluetooth settings page on the computer
system. Select this device for pairing. The Bluetooth indicator light
staying on indicates a successful connection.
To Next Page
Loading...