2.Display Status Description
After the machine is settled up an electric circuit, the "POWER" button will light on which
means the machine is powered on and stays at the Standby (Power off) status.
Timer indicator " o": If the timer is set up properly, the indicator will turn on, when the timer is
not set up properly the indicator light will turn off.
The lighting button indicator "o": When using the light function the indicator will turn on, and
turn off if the function is not used.
High-speed indicator " ": If you set the machine to high-speed fan mode, the indicator will
turn on.
Low-speed indicator " ": If you set the machine to low-speed fan mode, the indicator will
turn on.
Clothes-Dryer indicator " ": When the Clothes-Dryer mode is selected, the indicator will
turn on, otherwise it will be off.
Dehumidify mode indicator" ": When the machine starts to dehumidify, the indicator will turn
on. When the room environment humidity reaches the set humidity, the indicator will start
flashing. Otherwise, it will be off.
Continuous dehumidification mode indicator " ": When the Continuous Dehumidification
mode is selected, the indicator will turn on, otherwise it will be off.
Water full light indicator " ": When the water tank is full of water, the indicator will start
flashing.
When the machine is alarming, the display panel will appear alarm error. (The alarm error and
humidity data will be flashing rotation.)
When the machine is working properly, the data " " on the display panel will be the humidity
value.
Auto D efrost Function
When the machine is running at a lower temperature, the system will automatically
determine whether there is a presence of frost. If the machine determines there is
a presence of frost, it will start to defrost automatically.
Defrost Action
The fan will run at the high-speed mode while the compressor will stop working.
Defrost Status Display
In the defrosting status, the power button "o" will keep flashing.value.
o
o
o
o
o
To Next Page
Loading...