Why Aiviq Coffee Maker does not come on?
Your Aiviq Coffee Maker might not be turning on due to a few reasons. First, ensure that the appliance is properly plugged into the main socket and that the main switch is in the 'on' position. Also, the screen must be touched to start the machine.
What to do if Aiviq AEM-101S Coffee Maker coffee amount is insufficient?
If you find that your Aiviq Coffee Maker is not dispensing enough coffee, it's possible that the water channel is clogged by limescale. To resolve this, descale the appliance according to the descaling instructions.
What to do if Aiviq AEM-101S brew group cannot be removed?
If the brew group of your Aiviq Coffee Maker cannot be removed, it might not be in the correct position. Try restarting the appliance. Clear any warnings displayed on the screen, and the brew group should automatically return to its original position.
What to do if Aiviq AEM-101S milk is not frothed?
If the milk is not frothing properly in your Aiviq Coffee Maker, consider the following: * Check if the milk frother is dirty. If so, clean it thoroughly and make sure it is installed correctly. * The type of milk you're using might not be suitable for frothing. Try using whole milk for best results.
General| Model | AEM-101S |
|---|---|
| Category | Coffee Maker |
| Type | Espresso Machine |
| Water Tank Capacity | 1.5L |
| Pressure | 15 bar |
| Material | Stainless Steel |
| Weight | 7.5 kg |
To Next Page