EasyManuals Logo

Aiwa ALP40P User Manual

Aiwa ALP40P
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
2
your home, consult your dealer or local power company.
15. The socket outlet must be installed near the equipment and must be
easily accessible.
16. Do not overload ac outlets or extension cords. Overloading can
cause fire or electric shock.
17. Devices with class 1 construction should be connect ed to a main
socket outlet with a protective earthed connection.
18. Devices with class 2 construction do not require a earthed
connection.
19.
20.
Keep away from rodents. Ro
dents enjoy biting on power cords.
Always hold the plug when pulling it out of the main supply socket.
Do not pull the power cord. This can cause a short circuit.
21. Avoid placing the device on any surfaces that may be subject to
vibrations or shocks.
2
2. To clean the device, use a soft dry cloth. Do not use solvents or petrol
based fluids. To remove severe stains, you may use a damp cloth with dilute
detergent.
23. Damage or lost data caused by
malfunction
, misuse, modification of
the device or battery replacement will not be covered under warranty.
24. Do not interrupt the connection when the device is formatting or
transferring files. Otherwise, data may be corrupted or lost.
25. If the unit has USB playback function, the USB memory stick should be
plugged into the unit directly. Don’t use a USB extension cable because it
can cause interference resulting in failing of data.
26. The apparatus shall not be exposed to dripping or splashing and make
sure that no objects filled
with liquids, such as vases, are placed on or near
the apparat
us.
27. To completely disconnect the power input, the mains plug of the
apparatus shall be disconnected from the mains, as the disconnect device is
the mains plug of apparatus.
28. Battery shall not be exposed to excessive heat such as sunshine, fire
or the like.
29. Attention should be drawn to the environmental aspects of battery
disposal.
30. The unit should only be used in moderate climates. Avoid using in
extremely cold or extremely warm environments.
31. The
rating label has been marked on the bottom or back panel of the
apparatus.
32. This device is not intended for use by people (including children) with
physical, sensory or mental disabilities, or a lack of experience and
knowledge, unless they’re under supervision or have rece
ived instructions
about the correct use of the device by the person who is responsible for their

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Aiwa ALP40P and is the answer not in the manual?

Aiwa ALP40P Specifications

General IconGeneral
Light Source TypeLED
Brightness OutputLED bulb 2800 Lumens White light output 40 Lumens
Display Native Resolution800 x 480
Display Color16.7K
Projection Size30-150 inch
HDMI Input Supported Video Resolution.1080p, 1080i, 720p, 576i, 480p, and 480i
Power ConsumptionOperating 36W; Standby 0.8W
Power Input Connect Included AdapterDC 12V, 4A
Included Adapter Connect DC input of unitInput AC100-240V, 50/60Hz Output DC12V, 4A
Signal PortVi deo / V GA / H DM I
USB PortSupport USB device up to 1TB Support format mpeg1, Mpeg2, mpeg4, mp3, Jpeg
MicroSD CardSupport MicroSD card up to 32GB Support format mpeg1, Mpeg2, mpeg4, mp3, Jpeg
Weight and Dimensions IconWeight and Dimensions
Weight0.9 kg
Dimensions203 x 150 x 82 mm