What to do if my Aiwa AMD-805 Stereo System says 'No Disc'?
If your Aiwa Stereo System displays 'No Disc' after you've loaded a disc, there are a few things to check: * First, make sure the disc is placed correctly in the tray with the label side facing up. * Next, verify that the disc format is compatible with the system. * Finally, inspect the disc for any dirt or damage that might be preventing it from playing.
General| Brand | Aiwa |
|---|---|
| Model | AMD-805 |
| Category | Stereo System |
| CD Player | Yes |
| Remote Control | Yes |
| Frequency Response | 40Hz - 20kHz |
| Type | Mini Hi-Fi System |
| Tuner Bands | FM, AM |
| Total Harmonic Distortion | 1% |
| Cassette Deck | Yes |
| Speakers | 2-way speakers |
Controls the unit's power state, switching between on and standby modes.
Receives signals from the remote control for device operation.
Shows current status, time, or track information for the system.
Starts, pauses playback, or initiates a scan for tracks or stations.
Navigates to the previous track or channel, or decreases value.
Rewinds the disc or tunes to a lower frequency for radio.
Adjusts the audio volume level up or down.
Port for connecting USB storage devices for media playback.
Switches the system's input source between DVD, USB, FM, and AUX.
Adjusts audio equalization for different sound profiles like POP, CLASS, ROCK.
Halts current playback and returns to a stopped state.
Navigates to the next track or channel, or increases value.
Fast forwards the disc or tunes to a higher frequency for radio.
Audio input jack for connecting external devices via a 3.5mm cable.
Jack for connecting headphones for private listening.
Connection point for the FM radio antenna.
Outputs for connecting the left and right audio channels to speakers.
Output for composite video signal to a display device.
Analog audio outputs for left and right channels.
High-quality video outputs for component connection.
Turns the unit on or off, or puts it into standby mode.
Selects audio equalization presets like POP, CLASS, FLAT, ROCK, JAZZ.
Manages playback features, often for VCDs with menus.
Used for direct track selection, inputting numbers, or menu navigation.
Allows programming of playback sequences for music or video.
Clears current selections, programs, or settings.
Returns to the previous menu or screen.
Jumps to a specific time, chapter, or track.
Switches between DVD and USB playback modes.
Accesses the system's setup and configuration menus.
Navigates menu options upwards.
Navigates menu options to the left or adjusts settings.
Confirms selections or enters menus and options.
Navigates menu options to the right or adjusts settings.
Navigates menu options downwards.
Accesses DVD titles or menus.
Displays the main menu for DVD or other sources.
Stops playback or scanning.
Starts, pauses playback, or scans for content.
Moves to the previous track or channel, or decreases value.
Decreases the audio volume level.
Increases the audio volume level.
Rewinds playback or tunes to a lower FM frequency.
Fast forwards playback or tunes to a higher FM frequency.
Controls aspect ratio or picture settings.
Selects audio channel output (Left, Right, or Stereo).
Switches between different camera angles for DVDs.
Displays On-Screen Display information like track time.
Switches between DVD, USB, FM, AUX, and BT modes.
Plays back content in slow motion.
Magnifies the video image.
Repeats a specific segment of the playback.
Changes or selects subtitle languages.
Repeats the current track, chapter, or entire disc.
Temporarily silences the audio output.
Restores the system to its default settings.
Selects audio or subtitle language.
Functions for copying files or deleting them.
Turns the unit on or switches to standby mode.
Switches between POP, CLASS, FLAT, ROCK, JAZZ sound profiles.
Stops playback and allows resuming from the stopped point.
Advances playback quickly through the disc content.
Reverses playback quickly through the disc content.
Plays content in slow motion at various speeds.
Repeats the current chapter, title, or entire disc content.
Repeats a specific section of the DVD content between two points.
Magnifies the video picture by x2, x3, or x4.
Presses this key to return to the main menu.
Enables interactive playback for VCDs using digit buttons.
Press this key to play the selected menu.
Press this key to play the selected menu.
Choose a column, then press ENTER to confirm.
Watch the same scene from different angles.
Shift from one language (subtitle) to another.
Select left channel, right channel, or stereo audio output.
Mutes audio or adjusts volume level.
Check total remaining time of a title or chapter.
Shift between PAL and NTSC TV systems.
Switch between DVD, USB, FM, AUX and BT modes.
Play/pause and FM radio stations automatic search.
Restore default settings.
Switch between DVD and USB mode.
Setup playback sequence manually.
Select various functions of your player.
Search menus, titles, chapters, or specific times on DVDs.
Directly input a specific time for playback.
Input track numbers or time for SVCD, VCD, and CD playback.
Select songs by track number or navigate through playlists.
Access and navigate the main setup options using directional keys.
Select languages for OSD, audio, subtitles, and DVD menus.
Configure TV system, screen saver, video, and TV type settings.
Adjust video settings like brightness, contrast, hue, saturation, and sharpness.
Configure audio output modes such as downmix and stereo.
Configure Dolby audio settings including DP mode and dynamic range.
Steps for connecting the unit and turning it on for DVD playback.
Instructions for inserting discs and the player's automatic playback state.
Actions for play/pause, changing tracks/chapters, and stopping playback.
Procedure for safely turning off the unit and disconnecting power.
Insert a USB only when no disc is in the tray.
Switch to USB mode via the MODE or DVD/USB button.
Copy tracks from an MP3 disc to a USB device.
Copy tracks from an MPEG4 disc to a USB device.
Create or manage ID3 information for copied files.
Select specific programs or tracks to copy to USB.
Connect external devices wirelessly via Bluetooth.
Connect external music players using a 3.5mm auxiliary cable.
Tune into FM radio stations, search, and store channels.
Solutions for the 'No Disc' message, including disc placement and cleaning.
Troubleshooting steps for when no audio is produced by the unit.
Details on power supply and channel separation.
FM frequency range.
Output power, frequency response, and signal-to-noise ratio.
To Next Page
