To Next PageTo Next Page
Need help?Do you have a question about the Aiwa AWP-ZX7 and is the answer not in the manual?
General| Brand | Aiwa |
|---|---|
| Model | AWP-ZX7 |
| Category | Stereo System |
| CD Player | Yes |
| Remote Control | Yes |
| Radio | Yes |
| Cassette Player | Yes |
| Type | Mini System |
| Tuner Bands | FM |
| Tape Deck | Yes |
| Speakers | 2 |
| Bass Boost | Yes |
| Power Source | AC |
General warnings to prevent fire, shock hazards, and proper handling of the appliance.
Identifies the appliance as a Class 1 Laser Product and provides handling instructions.
Instructions for disposing of batteries as chemical waste.
Warning about risk of electric shock and user-serviceable parts.
Explains FCC rules, potential interference, and user remedies.
Warns against unauthorized modifications voiding operating authority.
Provides contact information for US customers and FCC compliance statements.
Safety and usage notices for customers in Canada.
States the product meets ENERGY STAR guidelines for energy efficiency.
Explains how to navigate and use the manual for system operations.
Lists the types of discs that can be played on the system.
Details discs that cannot be played, including 8cm discs and incompatible formats.
Explains ISO 9660 levels, Joliet, Romeo, and Multi Session CD formats.
Discusses issues with CD-R/RW playback, including recording quality and finalization.
Warns about potential playback issues with music discs encoded with copyright protection technologies.
Explains playback behavior for discs recorded in Multi Session and Mixed CD formats.
Provides step-by-step instructions for connecting the system components, starting with speakers.
Details how to connect speaker cords to the main unit's speaker terminals.
Instructions for setting up and connecting AM loop and FM lead antennas.
Guide for setting the voltage selector for different power line voltages.
Steps for connecting the power cord to a wall outlet and turning on the system.
Instructions on how to insert R6 (AA) batteries into the remote control.
Instructions for attaching speaker pads to stabilize speakers and prevent slipping.
Procedure to protect the CD mechanism when carrying the system.
Step-by-step guide to set the current time on the system.
Instructions on how to adjust an already set clock time.
Instructions on how to insert discs into the disc slot, including notes on handling.
Explains how to start playback of audio CDs and MP3 discs in normal or shuffle mode.
Details how to select modes like ALL DISCS, 1DISC, ALBM, SHUF, and PGM.
Describes operations like stop, pause, track selection, album selection, and disc skipping.
Provides important notes on disc access, album skipping, MP3 track limits, and encoding issues.
How to set and cancel repeat playback for single tracks or all tracks.
Step-by-step guide to create a custom playback program of up to 25 tracks.
How to start, cancel, and manage programmed playback sequences.
How to preset up to 20 FM and 10 AM stations for quick tuning.
Steps for automatically scanning and storing available radio stations.
Guide for manually tuning and storing specific radio frequencies.
Advice on improving reception, setting CD power, and changing AM tuning intervals.
How to tune in radio stations using preset or manual methods.
Detailed steps for listening to pre-stored radio stations.
Detailed steps for manually tuning into radio stations.
Tips for improving reception, using mono mode, and auto-tuning.
Explains the RDS service and its availability on FM stations.
How to tune into RDS-enabled stations and display station names.
How to cycle through RDS information like station name, frequency, and clock.
Instructions on how to insert a cassette tape into the tape deck.
Steps to play Type I tapes, including selecting playback sides and controls.
How to record an entire CD onto a cassette tape automatically.
Using Program Play to record specific CD tracks onto tape.
Guide to manually record from CD, Tuner, AUX, or PC onto a tape.
How to stop the manual recording process.
How to adjust bass and treble levels for desired sound output.
How to enhance bass sound with the i-Bass function.
Setting the system to turn off automatically after a specified time.
How to set the system to play music at a specific time.
Selecting the source (CD, Tape, Tuner) for the Play Timer.
How to activate, check, change, and cancel the Play Timer.
How to record a preset radio station at a specified time.
Steps for setting the start/stop times and selecting the recording side.
How to activate, check, change, and cancel the Rec Timer.
How to turn off the display to save power and how to cancel this mode.
How to check playing time, remaining time, track titles, and album titles of discs.
How to view TOC, volume label, album name, and track titles in different play modes.
How to display station names and preset numbers while listening to the radio.
Instructions for connecting a personal computer via USB for audio playback.
Lists the necessary computer hardware and operating system requirements for connection.
Steps to install the USB driver for Windows 98 SE and Millennium Edition.
Important notes regarding OS CD-ROM requirements and cable connection during detection.
How to check if the USB Audio Device is correctly installed in Windows Me.
Steps for installing the USB driver for Windows 2000 and XP operating systems.
How to verify the USB Audio Device installation in Windows 2000/XP.
How to check device status in Windows XP Device Manager.
Steps to install the USB driver for Mac OS 9.0.4 and 9.2.
Steps to install the USB driver for Mac OS X 10.1 to 10.3.
How to play audio files from a connected computer through the system's speakers.
Important notes on system operation, software quitting, and power off sequence during PC audio playback.
General guide to connecting external components like subwoofers and analog audio devices.
Details on connecting a personal computer via the USB port.
How to connect an optional subwoofer to the SUB WOOFER OUT jack.
Advice on optimal placement of the subwoofer for better bass reproduction.
How to connect analog audio components like MD decks or VCRs using AUX IN jacks.
Steps to select and play audio from connected components via AUX input.
Basic steps to resolve issues, including checking connections and power.
Specific steps to take when the I/O indicator flashes, related to power and connections.
Solutions for display messages, sound problems, noise, timer, and remote control malfunctions.
Advice on resolving color issues on a TV screen caused by speaker proximity.
Addresses issues with sound coming from only one channel or unbalanced volume.
Solutions for "LOCKED" display, disc not ejecting, and play not starting.
Explains why MP3 tracks might not play or titles may not display correctly.
Troubleshooting for severe hum, noise, or inability to receive stations.
How to ensure stereo reception for FM programs.
Solutions for tape deck not recording/playing, erasing errors, wow/flutter, noise, and no tape.
Troubleshooting for no sound or distorted sound from connected optional components.
Instructions to reset the system to factory settings if problems persist.
Explanations for messages like "No Disc", "Reading", "NO STEP", "OVER", "Push STOP!", "Step Full!".
Interpretation of the "Complete!" message for tuner preset operations.
Explanations for "No Tab" and "No Tape" messages related to the tape deck.
Explains messages like "TIME NG!", "SET CLOCK!", and "SET TIMER!" for timer functions.
Verifying voltage, handling power cord, liquids, and general safety rules.
Guidelines for placement, ventilation, and managing heat buildup.
Precautions for operation, moisture, and potential TV screen interference.
Instructions for cleaning discs and warnings about disc types and labels.
Instructions for cleaning the cabinet and managing tape cassettes.
Procedures for cleaning and demagnetizing tape heads.
Technical specifications for the amplifier, including power output and harmonic distortion.
Impedance and voltage specifications for speakers and subwoofer output.
Technical details for the CD player laser and tape deck recording system.
FM/AM tuning ranges, intermediate frequencies, and antenna specifications.
Includes power requirements, consumption, dimensions, mass, and supplied accessories.
Guide on how to find button locations and their corresponding reference pages.
Visual index of buttons on the main unit with their corresponding illustration numbers and reference pages.
Alphabetical list of main unit buttons with their functions and reference pages.
Alphabetical listing of remote control buttons with their functions and reference pages.
Detailed descriptions of the functions for each button on the remote control.
