En
E
F
PRESETTING STATIONS
You can preset up to 15 stations in each band. When a
station is stored, a preset number is assigned to the station.
Use the preset number to tune in to a preset station directly.
1
Press the TUNER/BAND button to select a band.
Then, press the f or g button to select a
station.
2
Press the a button to store the station.
A station is assigned a preset number, beginning from 1
in consecutive order for each band.
3
Repeat steps 1 and 2.
Preset number
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1
Press the TUNER/BAND button to select a band.
2
Press the numbered buttons to select a preset
number.
Example:
To select preset number 15, press the +10 and 5
buttons.
To select preset number 10, press the +10 and 0
buttons.
Another method to select a preset number
Press the TUNER/BAND button to select a band. Then,
press the d button (or the c button) repeatedly.
Each time the button is pressed, the next ascending number
is selected.
To clear a preset station
Select the preset station to be cleared. Then, press the s
button, and press the a button within 4 seconds.
The preset numbers of all other stations in the band with
higher numbers are also decreased by one.
ENGLISH 9
To Next Page
Loading...
