Need help?Do you have a question about the Aiwa CX-NA50 and is the answer not in the manual?
General| woofer size | 160 mm |
|---|---|
| tweeter size | 60 mm |
| super tweeter size | 20 mm |
| FM tuning range | 87.5 MHz to 108 MHz |
| AM tuning range | 530 kHz to 1710 kHz |
| impedance | 6 ohms |
| sound pressure level | 87 dB/W/m |
Weight and Dimensions| weight | 3.3 kg |
|---|---|
| dimensions | 243 × 304 x 245 mm |
General| power output | 60W+60W |
|---|---|
| total harmonic distortion | less than 0.05 % |
| video/aux input | 150 mV |
| MD input | 150 mV |
| MIC input | 1.8 mV |
| line out | 200 mV |
| super woofer | 1.9 V |
| track format | 4 tracks, 2 channels |
| frequency response CrO2 tape | 50 Hz - 16000 Hz |
| frequency response normal tape | 60 Hz - 15000 Hz |
| laser | semiconductor laser (Z = 780 nm) |
| signal-to-noise ratio | 85 dB |
| harmonic distortion | 0.05 % |
| power requirements | 120 V AC, 60 Hz |
| power consumption | 95 W |
Weight and Dimensions| weight of main unit | 6.5 kg |
|---|---|
| dimensions of main unit | 260 x 309 x 346 mm |
To Next Page
