To Next PageTo Next Page
Need help?Do you have a question about the Aiwa FD-N939 and is the answer not in the manual?
General| CD Player | Yes |
|---|---|
| Cassette Deck | Yes |
| Bluetooth | No |
| Number of Speakers | 2 |
| Tuner | Yes |
| Tuner Bands | AM/FM |
Lists the main components of the stereo system: RX-N939, FD-N939, SX-N939.
Alerts users to reduce fire/electric shock risk by avoiding rain/moisture.
Includes FCC compliance, caution against modifications, and graphical symbol explanations.
Checks voltage, safe handling of AC cord, and immediate replacement of damaged cords.
Guides on proper placement, ventilation, and handling condensation.
Step-by-step guide to set the hour and minutes for the clock.
How to adjust T-BASS for deep bass and BBE for clear sound.
Adjusting left/right balance, volume, and temporary muting.
Instructions for inserting, playing, stopping, pausing, and removing CDs.
How to select the first disc and individual tracks using remote control buttons.
Steps to program tracks from discs and start programmed playback.
Instructions for inserting tapes, matching Dolby NR, and starting playback.
How to tune into stations manually and select bands.
Steps to select and memorize radio stations using preset numbers.
Steps for inserting tape, selecting Dolby NR, sides, direction, source, and starting recording.
How to record with Dolby NR, insert blank spaces, and adjust sound during recording.
Procedures for erasing tapes and starting recording with the remote control.
Step-by-step guide for simultaneous CD playback and tape recording.
Steps for setting up AI edit recording, including tape insertion and Dolby NR selection.
Entering tape length, selecting discs, and starting the AI edit recording process.
Preparing the recording tape and CD, then pressing the EDIT-PRGM button.
Entering tape length and selecting tracks for programmed editing.
Selecting discs and tracks for side B, and starting the recording.
Steps for dubbing tapes, including tape insertion, speed selection, and starting dubbing.
How to stop dubbing, select dubbing speed, and notes on synchronized dubbing.
How to turn on the equalizer and select predefined sound profiles.
Steps to set peak frequency and level for a new custom equalization curve.
How to open the control stage, turn on DSP, and select surround modes.
How to select timer functions (EVERY/ONCE) and bands.
Detailed technical specifications for the amplifier and tuner sections.
Technical specifications for the cassette deck and CD player.
Common issues and solutions for general system problems and tuner reception.
Troubleshooting steps for cassette deck and compact disc player issues.
