EasyManua.ls Logo

Aiwa NSX-T99 LH User Manual

Aiwa NSX-T99 LH
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SERVICE MANUAL
DATA
COMPACT DISC STEREO
CASSETTE RECEIVER
BASIC TAPE MECHANISM : 2ZM-3MK2 PR4NM
BASIC CD MECHANISM : 6ZG-1 ZRNDM
NSX-T99
NSX-T99E
LH
HA
S/M Code No. 09-003-426-5R1
REVISION
This Service Manual is the “Revision Publishing” and replaces “Simple Manual”
NSX-T99/T99E, (S/M Code No. 09-002-426-5T1).
If requiring information about the CD mechanisim, see Service Manual of 6ZG-1,
(S/M Code No. 09-001-338-7N2)
CD
CASSEIVER
SYSTEM
REMOTE
CONTROL
NSX-T99 CX-NT99
SPEAKERS
SX-WNT99 RC-ZAS04
NSX-T99E CX-NT99E
All manuals and user guides at all-guides.com
all-guides.com
Question and Answer IconNeed help?

Do you have a question about the Aiwa NSX-T99 LH and is the answer not in the manual?

Aiwa NSX-T99 LH Specifications

General IconGeneral
TypeStereo receiver
Power output100 watts per channel into 6Ω
Frequency response20Hz to 20kHz
Input sensitivity250mV (line)
Dimensions17.5 x 5.5 x 13.5 inches
Weight22 lbs
Tuning rangeFM
Signal to noise ratio75dB (line)
Speaker load impedance4-16 ohms
Signal-to-Noise Ratio75dB (line)

Summary

Service Manual Overview

Product Identification

Identifies the product as a Compact Disc Stereo Cassette Receiver with specific models.

Specifications

FM Tuner Section Specifications

Details the tuning range and sensitivity of the FM tuner.

AM Tuner Section Specifications

Details the tuning range and sensitivity of the AM tuner.

Amplifier Section Specifications

Provides power output and distortion figures for the amplifier.

Cassette Deck Section Specifications

Lists track format, frequency response, and signal-to-noise ratio.

Compact Disc Player Section Specifications

Details laser, D-A converter, and signal-to-noise ratio for CD player.

Speaker System Specifications

Describes the cabinet type and speaker drivers for the SX-WNT99 system.

General Specifications

Covers power requirements, consumption, and unit dimensions/weight.

Protection of Eyes from Laser Beam During Servicing

Laser Safety Precautions

Guidelines for safe laser beam handling and avoiding exposure during servicing.

Optical Block Replacement Precaution

Steps for replacing the optical block, emphasizing electrostatic discharge precautions.

Note on Before Starting Repair

Forced Discharge of Electrolytic Capacitors

Procedure to safely discharge power supply capacitors before starting repair.

Microcomputer Troubleshooting Checks

Checks for microcomputer functionality including HOLD terminal, reset, and soldering.

Transistor Illustration

Wiring Diagram - Main

Schematic Diagram - Main

Related product manuals