Aiwa PX-E80 - User Manual

S/M
Code
No.90-007
DATE
OF
ISSUE
2/1990
-|
AIWA’
PX-E80
MAN
UAL
STEREO
TURNTABLE.
SYSTEM
@ TYPE. H, U, E, K
SPECIFICATIONS
<Turntable Section> :
Drive system Belt drive system
Motor DC servo motor
Speeds . 33-1/3 and 45 rpm
Wow & flutter 0.25% (WRMS)
S/N ratio 45 dB (DIN-B)
<Tonearm Section>
Type Offset arm
<Cartridge>
Type VM type
Frequency response 20-20,000 Hz
<General>
Output level 200 mV/(2.5 mV sw OFF)
Power requirements PX-E80 U
AC 120 V,60 Hz
PX-E80E
AC 220 V, 50/60 Hz
PX-E80 K
AC 240 V, 50/60 Hz
PX-E80 H
AC 110-120 V/220-240 V
switchable, 50/60 Hz
Power consumption 4W
Dimensions 360 (W) x 96.5 (H) x 350 (D) mm
Weight 2.6 kg
< Stylus > AN-11
@ Design and specifications are subject to change without
not ice.
AIWA
Co.,
Ltd.
Tokyo
Japan
Printed in Japan

Summary

SPECIFICATIONS

General Specifications

Covers output level, power requirements, consumption, dimensions, and weight.

ADJUSTMENT

Auto Lead In and Auto Return Adjustment

Adjustment procedure for auto lead in and auto return functions.

Phono Motor Speed Adjustment

Procedure for adjusting turntable motor speeds.

ELECTRICAL MAIN PARTS LIST

PRACTICAL SERVICE FIGURE

ACCESSORIES;PACKAGE LIST

SCHEMATIC DIAGRAM

U Model Schematic

Circuit diagram for the U model turntable system.

H Model Schematic

Circuit diagram for the H model turntable system.

E Model Schematic

Circuit diagram for the E model turntable system.

K Model Schematic

Circuit diagram for the K model turntable system.

WIRING

Pre Amp C.B. Wiring

Wiring connections for the pre-amplifier circuit board.

Switch C.B. Wiring

Wiring connections for the switch circuit board.

Power C.B. Wiring

Wiring connections for the power circuit board.

Terminal C.B. Wiring

Wiring connections for the terminal circuit board.

EXPLODED VIEW

MECHANICAL PARTS LIST

Aiwa PX-E80 Specifications

General

Type	Belt-drive turntable
Speed	33 1/3, 45 RPM
Drive method	Belt drive
Motor	DC motor
Signal-to-Noise Ratio	60 dB
Platter	Aluminum die-cast
Effective Arm Length	220 mm
Overhang	19 mm
Output Voltage	2.5 mV at 1 kHz, 5 cm/sec
Frequency Response	20 Hz to 20 kHz
Power Supply	AC 120V, 60Hz
Cartridge	MM (Moving Magnet) type
Tracking Force	3.5 g
Tonearm	Static balance type