Aiwa TS-W35 User Manual

ana
SERVICE
TS-W35
ACTIVE SPEAKER SYSTEM
e TYPE: EZ,K
SPECIFICATIONS
Input terminals
INPUT 1 jack
INPUT 2 terminals
Input sensitivity/impedance
INPUT 1: 0.8 V/50 kilo ohms (at 60 Hz)
INPUT 2: 8 V/4.4 kilo ohms (L and R) (at 60 Hz)
Output terminals
SPEAKERS OUT terminals
Power output
Rated: 50 W (8 ohms, T.H.D. 1%, 60 Hz/DIN 45500)
Reference: 60 W (8 ohms, T.H.D. 10%, 60Hz/DIN 45324)
DIN Music Power: 100W
Frequency response
35 Hz — 200 Hz
Speaker type Bass reflex type
Speaker unit 20 cm (Magnetically shielded type)
Power requirement AC 230 V, 50 Hz
Power consumption 60 W
Dimensions (w/h/d) 260 x 304 x 381 mm
Weight 7.6 kg
* Design and specifications are subject to change without
notice.
S/M Code No. 09-983-254-1FP
=
—
=>
A
—
—
a2
CO)
pmencae
—
as
a2
CS)

Aiwa TS-W35 Specifications

General

Brand	Aiwa
Model	TS-W35
Category	Speaker System
Language	English

Summary

Specifications

Input Terminals

Details the types of input jacks and terminals available for audio signals.

Input Sensitivity and Impedance

Specifies the voltage and impedance requirements for input signals.

Output Terminals

Identifies the connection points for external speaker outputs.

Power Output

Details the rated and reference power output with distortion and frequency specifications.

Frequency Response

Defines the range of audio frequencies the system can reproduce.

Speaker Type

Identifies the physical design of the speaker enclosure.

Speaker Unit

Specifies the size and shielding type of the speaker driver.

Power Requirement

Indicates the voltage and frequency of the AC power supply needed.

Dimensions

Provides the physical width, height, and depth of the unit.

Power Consumption

States the electrical power drawn by the unit during operation.

Weight

Specifies the total weight of the device.