To Next PageTo Next Page
Need help?Do you have a question about the Aiwa XR-EM50 and is the answer not in the manual?
General| Tuner | AM/FM |
|---|---|
| CD Player | Yes |
| Remote Control | Yes |
| Type | Stereo System |
| Speakers | 2-Way Speakers |
| Tape Deck | Double Cassette Deck |
Explains the meaning of symbols used in the manual for safety warnings and precautions.
Covers safe installation, placement, ventilation, and preventing damage from objects/liquids.
Advice on power sources, plug safety, cord management, and preventing electrical overloads.
Safety precautions regarding overhead power lines near antennas.
Guidance on proper grounding for antenna systems.
How to protect the unit from lightning damage.
Instructions for cleaning the unit and tape heads.
Identifies conditions that require professional servicing.
Details on replacement parts and post-repair safety.
Order of connecting power, speakers, and antennas.
How to connect the speakers to the main unit.
Connecting the FM and AM antennas to the unit.
Inserting batteries into the remote control.
Overview of buttons and jacks on the front of the main unit.
Identification of terminals and ports on the rear of the main unit.
Covers power, track selection, and basic mode buttons.
Details on tape, tuner, CD, AUX, and recording controls.
Explains timer, sleep, program, and edit functions.
How to turn the unit on, off, and adjust display brightness.
Explains power saving ECO mode and its consumption.
Step-by-step guide to set the clock time and format.
How to insert, play, stop, and pause a CD.
Skipping, searching, and selecting tracks on a CD.
Setting and canceling random or repeat playback modes.
How to program and play selected tracks in order.
Checking, clearing, adding, or changing programmed tracks.
How to manually tune radio stations and search for signals.
Presetting and tuning into favorite radio stations.
How to remove a preset station from memory.
Switching FM reception between stereo and monaural.
Changing the AM tuning step interval (kHz/step).
Adjusting the audio volume level of the unit.
Adjusting the bass and treble sound characteristics.
Inserting, playing, stopping, and ejecting tapes.
Selecting reverse mode, rewinding, fast forwarding, and resetting counter.
Step-by-step guide for basic tape recording.
Recording from CDs, including synchro and track selection.
How to record blank spaces and erase tapes.
Recording CDs with AI Edit, adjusting for tape length.
Selecting specific CD tracks for programmed tape recording.
Steps to finalize programmed and AI edit recordings.
Stopping, checking, changing, or clearing edit programs.
How to protect cassette tapes from accidental recording.
Setting the unit to turn off automatically after a set time.
Scheduling the unit to turn on and play at a specific time.
Scheduling the unit to record at a specific time.
Steps to set timer-on time, source, duration, and volume.
Checking, changing, or canceling timer recording settings.
How to set timers directly on the main unit.
Instructions for cleaning and maintaining the unit and media.
Solutions for problems like no sound, unit shutdown, or poor reception.
Dealing with condensation and resetting the unit.
Detailed technical specs for the main CX-LEM50 unit.
Technical details for the SX-LEM50 speaker system.
Power requirements, dimensions, weight, and copyright notice.
Details on FCC rules and Canadian ICES-003 compliance.
Warnings about modifications, plug usage, and user rights.
