Precautions
To avoid power supply damage and keep safe working environment,
the following items should be observed:
The product uses a three wire grounding plug, which must be inserted in a three hole grounding
socket. Do not change the plug or use an ungrounded three plug adaptor to avoid poor grounding.
To lengthen the wire, please use a grounded three wire power cord
Built-in precision electronics, non-professionals please do not disassemble without authorization.
Please adjust strictly according to the official parameters.
Do not exceed the value range to prevent product damage and malfunction.
Please adjust strictly according to the official parameters. Do not exceed the value range to prevent
product damage and malfunction.
Do not reverse the connection, otherwise it will cause a short circuit.
Please do not mix metal flakes and wire debris into this product.
Otherwise it may cause electric shock, fire, or failure.
Replace fittings with original accessories.
If it is in idle for a long time, please place it in a dry environment.
Do not wet the power supply, and do not use it nor pull the power cord with wet hands.
Please strictly follow this manual when using.
11
To Next Page
Loading...