AJAX FireProtect 2 Operating Instructions

1
Technical Data Sheet: FireProtect 2 Jeweller
FireProtect 2
(Heat / Smoke
Jeweller
Wireless smoke and heat detector.
Featured with a built-in siren for alarm and
event notication. It can operate as part of
the Ajax security system and
autonomously without a hub.
Find the detailed information
on the device at:
support.ajax.systems/en/manuals/reprotect-2-heat-smoke/
Jeweller
The device is available in two options. The model with replaceable batteries has a mark RB in
the name, and with non-replaceable batteries — the SB.
Key features
Accurate detection of threats
 HazeFlow 2 software algorithm to prevent false alarms on the smoke
 Bispectral optical sensor for ltering false alarms on the smoke
 Maintenance-free smoke chamber.
Advanced hardware and software
 An interconnected alarm of all re detectors at the facilit y in 2 0 seconds
 Built-in siren with a volume of 85 dB at a distance of 3 meters
 Abilit y to operate autonomousl y without an A j a x hub
  U p to 10 y ears on non-replaceable batteries , and up to 7 y ears on replaceable.
EN 1460
2 00
AC: 2 008

AJAX FireProtect 2 Specifications

General

Battery Life	Up to 5 years
Communication Protocol	Jeweller
Tamper protection	Yes
Dimensions	120 x 120 x 50 mm
Weight	200 g
Jeweller radio technology	Yes
Type	Wireless
Detector type	Optical smoke detector
Communication	Two-way
Humidity	Up to 80%
Humidity Range	Up to 80%
Operating humidity	Up to 80%
Alarm Volume	85 dB
Audible alarm volume	85 dB
Alarm type	Sound and visual alarm
Temperature alarm threshold	54 °C
Certification	EN 14604