Note:
• In case of an activated alarm time, a dot will light up at “AL1 BUZZER / AL1 RADIO” and/or at “AL2
BUZZER / AL2 RADIO”.
• If you do not press a button within 4 seconds, the settings are accepted automatically.
• The alarm function ends automatically after approx. 60 minutes and the device switches off.
TURN OFF THE ALARM
TO TURN OFF THE ALARM UNTIL THE FOLLOWING DAY, PRESS ON/OFF
BUTTON.
ACTIVATING / DEACTIVATING THE ALARM TIME
IN TIME MODE, REPEATEDLY PRESS THE AL1/VOL- OR THE AL2/VOL+
BUTTON, UNTIL THE DOT ON THE DISPLAY NEXT TO THE ALARM TIME TEST
GOES OUT.
SLEEP FUNCTION
IF YOU WANT TO LISTENING THE RADIO WHILE FALL ASLEEP. YOU CAN
USE SLEEP FUNCTION BY SETTING THE SLEEP TIME.
WITH THE RADIO ON, PRESS THE SLEEP / SNOOZE BUTTON (4) TO ENTER
INTO SLEEP MODE, THE 90 No. SHOWS ON THE LED DISPLAY (8). IT STATES
90-MINUTES OF SLEEP TIME AND TO BE SETTED IN SEQUENCE 90-80-70-60-
50-40-30-20-10-OFF. PRESS THE SLEEP / SNOOZE BUTTON (4) TO CHOOSE
YOUR DESIRED SLEEP TIME, THE SLEEP TIMER WILL CHANGE BY 10
MINUTES EACH TIME YOU PRESS THE SLEEP BUTTON (4). THE UNIT WILL
STOP PLAYING WHEN THE TIMER COUNTDOWNS FROM THE PRESET SLEEP
TIME TO THE END AND THEN SWITCH OFF BY ITSELF.
SNOOZE FUNCTION
ON ALARM SOUND MODE, PRESS ON/OFF (1) TO STOP THE ALARM, THE
ALARM WILL NOT RESUME. BUT IF YOU PRESS THE SLEEP/SNOOZE
BUTTON (4) TO STOP THE ALARM, THE AL ICON OF THE LED DISPLAY (8) WILL
BLINK, AND THE ALARM WILL RESUME AFTER 9 MINUTES.
BATTERY BACKUP
THIS CLOCK HAS A BACKUP POWER SYSTEM TO ENSURE CONTINUOUS
OPERATION DURING POWER FAILURE. INSERT 2xAAA BATTERY AND THE
CLOCK MECHANISM WILL CONTINUE TO MAINTAIN THE CURRENT TIME
AND ALARM PROGRAM.
SPECIFICATION
POWER SUPPLY: AC 220-240V ~ 50Hz
POWER CONSUMPTION: 5W
BATTERY POWER RESERVE: 2x1.5V, AAA, R03 (BATTERIES NOT
INCLUDED)
FREQUENCY RANGE: FM: 87.5 ~ 108 MHz
AM: 522 ~ 1620 KHz
DRIPPING & VENTILATION WARNING
THE PRODUCT SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE
PLACED ON THE PRODUCT. THE NORMAL VENTILATION OF THE PRODUCT
SHALL NOT BE IMPEDED FOR INTENDED USE.
IMPORTANT SAFETY INSTRUCTIONS
Warning:
1. No naked flame sources, such as lighted candles, should be placed on the
apparatus.
2. Attention should be drawn to environmental aspects of battery disposal.
3. Do not install this equipment in a confined or building-in space such as a
book case or similar unit, and remain a well ventilation conditions.
The
ventilation should not be impeded by covering the ventilation openings with
items such as newspaper, table-cl
oths, curtains etc.
4. WARNING: Only use attachments/accessories specified or provided by the
manufacturer.
5. WA
RNING: Please refer the information on exterior rear enclosure for
electrical and safety information before installing or operating t
he
apparatus.
6. WA
RNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be exposed t
o
dripping or splashing and that objects filled with liquids, such as vases, shall
not
be placed on apparatus.
7. WARNING: The battery (battery or batteries or battery pack) shall not be
exposed to excessive heat such as sunshine, fire or the like.
8. WARNING: Mains plug is used as disconnect device, the disconnect device
shall remain readily operable.
9. When not in use and during movement, please take care of the power cord
set. When put into use again, please make sure the power cord set bei
ng
not damaged, if any damages found, please look for the service person to
replace the power cord set specified by the manufacturer or have the same
char
acteristics as the original one.
10. Use of the apparatus in moderate climates.
11. This equipment is a Class Ⅱ or double insulated electrical
appliance. It has been designed in such a way that it does not
require a safety connection to electrical earth.
DISPOSAL OF WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on the product or packaging means that the product should not be
treated as household waste. Do not throw garbage at the end of its life, but take it to
a collection center for recycling. In this way you will help to protect the environment
and be able to prevent any negative consequences that it would have on the
environment and human health. To find your nearest collection center:
- Contact local authorities;
- Access the website: www.mmediu.ro;
- Request additional information from the store where you purchased the product.
P. 3
P. 4
To Next Page
Loading...
Need help?
General
