Akai AK-8KGFLW - Control panel (Fig. 14)

After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
15
Getting Started (Cont.)
Control panel (Fig. 14)
1 Wash programs
2 Program dial: Turn the program dial to switch on the machine and select your
desired wash program.
3 Stand-by position: Turn the dial to the stand-by position to switch the machine to
stand-by (it switches to stand-by automatically at the end of the program, but the
dial remains on the selected program position).
4 LED display: Shows the settings, estimated time remaining, options, codes, etc.
5 Temp. button: Press to adjust a program’s default temperature (if available). Press
and hold this button to set the child lock function.
6 Spin Speed button: Press to adjust a program’s default spin speed (if available).
Press and hold this button for at least 3 seconds to mute the buzzer.
7 +Rinse button: Press to add an additional rinse (if available).
8 Delay Start button: Press to set the delay function (up to a maximum of 24 hours).
9 Start/Pause button: Press to start the program or to pause it.
Display (Fig. 15)
The numbers on the LED display (A) show the remaining time, delay time, number of
extra rinses, water temperature or spin speed.
Icons will illuminate when you have the buzzer (B) muted, child lock (C) set or door
lock (D) activated.
5
1
A
3 1
2
4
6
7 8
9
B C D