Akai AK-95WM

After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
14
Controls
Water Level Button
• Press this button to increase or decrease the desired
water level for the selected program.
• When the machine is first powered on, the default
program is the Heavy program. This program uses
‘fuzzy logic’ whereby the machine automatically
detects the weight of your wash load and selects the
appropriate water level accordingly.
• With the exception of the Heavy program, the other 5
programs have predetermined water levels based on
the manufacturer’s recommended settings.
• When the indicator light is solid, it represents the cor-
responding water level on the left side of the display
(1, 3 or 5).
• When the indicator light is flashing, it represents the
corresponding water level on the right side of the
display (2, 4 or 6).
Rinse Button
• Press this button to add to
or reduce the number or
rinse cycles for the select-
ed program. Each program
has a preselected number
of rinse cycles based on
the manufacturer’s recom-
mended settings for the
selected program.
• NOTE: No change can be
made if you have selected
the Standard program.
Wash Button
• Press this button to
increase or decrease the
wash time of the selected
program. Each program
has a preselected wash
time, which is the manu-
facturer’s recommended
setting for the selected
program.
• NOTE: No change can be
made if you have selected
the Standard program.
Spin Button
• Press this button to
increase or decrease
the length of time that
the washer dedicates to
the spin cycle during the
selected program. Each
program has a preselected
spin time, which is the
manufacturer’s recom-
mended setting for the
selected program.
• NOTE: No change can be
made if you have selected
the Standard program.
Delay Button
• Press this but-
ton to delay the
start of your
selected wash-
ing program.
• The delay start
feature allows
you to select a
period of be-
tween 1 and 24
hours in which
the machine will
delay the start
of the selected
washing pro-
gram.
Child Lock
• Press the
Water Level
and Spin
buttons at the
same time to
lock buttons
on the control
panel.
• Press the
Water Level
and Spin
buttons at the
same time
again to un-
lock buttons.