After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
23
Instructions (Cont.)
All-in-1 (3-in-1) detergent tablets
Some detergent tablets combine dishwasher detergent with rinse aid (and sometimes
other ingredients). Before using such all-in-1 (or 3-in-1, or similar) tablets in your
dishwasher, check and make sure that the water hardness in your supply is compatible
with these tablets. Check on the packaging or contact the detergent manufacturer.
• Strictly follow the detergent manufacturer’s recommendations for use of such tablets.
• If you encounter problems when using such tablets for the first time, seek advice
from the detergent manufacturer (see the product packaging for contact details).
The all-in-1 function
This dishwasher has a special all-in-1 function, which will help dissolve the detergent
at the appropriate time during the wash cycle.
To select this function, proceed as follows:
• Close the door and press the OPTION button until the All-in-1 indicator blinks. The
dishwasher will now use the all-in-1 washing program and dissolve the detergent at
the appropriate time during the wash cycle.
• To cancel the all-in-1 washing program, press the OPTION button or follow the
“Changing a program” instructions (on page 26).
• If you decide to switch back to using a standard detergent system, we advise that
you refill the rinse aid compartment, set the rinse aid dispenser (water hardness
setting) to the highest possible position and run the dishwasher for three normal
cycles without a load. Then readjust the water hardness setting according to the
conditions for your region.
To Next Page
Loading...