After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
24
Instructions (Cont.)
Rinse aid
Rinse aid is automatically released during the last rinse to prevent water from forming
droplets on your dishes, which can leave spots and streaks. It also improves drying by
allowing water to roll off the dishes. Your dishwasher is designed to use liquid rinse aid.
CAUTION!
Only use specific, branded rinse aid for your dishwasher. Never fill the rinse aid
dispenser with any other substances (e.g. dishwasher cleaning agent, liquid
detergent) as this could damage the appliance.
Filling the rinse aid dispenser
Unless you are going to use all-in-1 dishwasher detergent tables, fill the rinse aid
dispenser before first use. The dispenser is located inside the door next to the
detergent dispenser. It holds about 140mL.
Fig. 14: Turn anticlockwise to open Fig. 15: Pour in rinse aid
• To open the dispenser, turn the cap in
anticlockwise direction and lift it out
(Fig. 14).
• Carefully pour rinse aid into the dispenser
until the level indicator turns completely
black (Fig. 15). Take care not to overfill.
• To replace the cap in the opening, align it
with the “open” arrow and turn it clock-
wise (right) to the “closed” arrow (Fig. 16).
CAUTION!
Clean up any rinse aid spilled while filling with an absorbent cloth or paper towel to
avoid excessive foaming during the next wash.
Do not forget to replace the cap before you close the dishwasher door.
Fig. 16: Turn clockwise to lock
To Next Page
Loading...
