Akai AM-2650

AC INLET SYSTEM
This model is equipped with an AC INLET SYSTEM. Please refer to the AC INLET SYSTEM CHART below for the
specific type. By the AC INLET SYSTEM, AC (mains) cord can be connected to and disconnected from the model
because the model is provided with socket exclusively for AC (mains) cord on its main body.
Please note, however, that certain models are not equipped with this system and has a built-in AC (mains) cord as
before.
AC INLET SYSTEM CHART
CLASS I CLASS II
© This mark indicating double insula-
tion will be attached to machine's rear
panel
| O :
Picture 1
AC INLET
to be
aE; installed
| on machines
Most of
European
countries
gS) Connects to
iV machine's
Wy AC Inlet Most of the
Connects to European
machine's
Picture
2
countries
AC Inlet
AC (mains)
cord v4
Australia Australia
differs according differs according
to wall socket to wall socket
Parts List for AC (mains) Cord Set
[ Standard Description Type of AC Inlet Parts No.
CEE Cord Set CEE (3 cores) 3P EW302993 |
Ges BEAB Cord Set BEAB (3 cores) 3P EW302994
a SAA Cord Set SAA (3 cores) 3P EW302996
L U/T Cord Set U/T (3 cores) 3P EW302646
CEE Cord Set CEE (2 cores) 2P EW638144
Aneta BEAB Cord Set BEAB (2 cores) 2P EW302995
-e SAA Cord Set SAA (2 cores) oP EW302991 |
| U/T Cord Set U/T (2 cores) 2P EW302899
37