To Next PageTo Next Page
Need help?Do you have a question about the Akai AX-890 and is the answer not in the manual?
General| Brand | Akai |
|---|---|
| Model | AX-890 |
| Power Output | 130 watts per channel into 8Ω (stereo) |
| Frequency Response | 5Hz to 100kHz |
| Total Harmonic Distortion | 0.005% |
| Input Sensitivity | 0.2mV (MC), 2.5mV (MM), 150mV (line) |
| Signal-to-Noise Ratio | 76dB (MC), 86dB (MM), 100dB (line) |
| Dimensions | 440 x 156 x 400mm |
| Weight | 12.4kg |
| Tuning range | FM |
Guidelines for safe servicing procedures and part replacement.
Important points to note when repairing or adjusting the unit.
Procedures for checking insulation and leakage current after service.
Discusses power supply interdependencies and connection requirements.
Detailed specifications for the Tuner CD Player section.
Describes instrument connections for AM and FM tuner adjustments.
Procedure to recall preset frequencies for adjustment and inspection.
Specific adjustment procedures for FM tuning, sensitivity, distortion, and AM tuning.
Procedure to adjust head azimuth alignment for tape playback.
Procedure for setting the recording bias for different tape types.
Procedures for adjusting tape speed for TAPE-I and TAPE-II in normal and X2 modes.
