BLUETOOTH OPERATION
Note: Prior to use Bluetooth function, your AKAI micro system should be paired firstly with your
Bluetooth device. (“Pairing” means establish connection between Bluetooth devices such as MOBILE
PHONE, TABLETS, PC, ETC.)
1. Press the
“SOURCE” button to switch into the BLUETOOTH MODE, “BT” displays on the
LCD.
2. In Bluetooth mode, the blue status indicator flashes three times, then 2 beep sounds, the status
indicator goes RED & flashes, AKAI micro system enters automatically searches for Bluetooth
device.
4. Turn on Bluetooth functionality on your device and make it discoverable (see your devices
instructions to add or setup a Bluetooth device).
5. Search for Bluetooth equipment “AM-301” is your AKAI micro system identification.
Red status indicator switches to blue lighting which means that devices are successfully paired.
(During the paring, if the Bluetooth Version is below 3.0, you need to input code “0000”)
Your Bluetooth device stores the AKAI micro system unique identification at the same time.
NOTE: The effective range of Bluetooth devices is 10 meters.
Once paired, your device should connect to the AM-301 whenever within the Bluetooth range (10
meters).
To Next Page
Loading...
