To Next Page

To Previous Page

After the disc has been loaded, a content menu will display on the TV screen.

 Press the arrow buttons (11) to select a menu item.

 Press the ENTER button (27) to enter the selected menu item.

During playback, the following functions are available:

 To select a chapter (DVD) or track (CD), press the digit buttons (2).

 To select the next or previous chapter (DVD) or track (CD), press the PREV button (25) or the

NEXT button (24).

 To forward or rewind the DVD, press the FWD button (7) or the REV button (8). The available

speed rates are: 2x, 4x, 8x, 16x, 32x.

 To pause playback, press the PLAY/PAUSE button (18) once; to resume playback, press the

button again.

 To stop playback temporarily, press the STOP button (32) once. Press the button again to stop

playback permanently, or press the PLAY/PAUSE button (18) to resume playback.

To repeat a chapter (DVD) or one or all tracks (CD):

 - Press the REPEAT button (15) once to repeat the current chapter or track.

 - Press the button twice to repeat all chapters or tracks.

 - Press the button three times to cancel the function.

 - Press the button once again to exit the REPEAT function.

 To play the DVD frame by frame, press the STEP button (16). Press the PLAY/PAUSE button

(18) to resume normal playback.

 To view a specific title of a DVD, press the TITLE button (10). Use the arrow buttons to select the

title.

 To switch on the subtitles of a DVD, press the SUBTITLE button (26). Press the button again to

switch off the subtitles.

 To select the camera angle, press the ANGLE button (20).

Please note:

 Normally, if an MP3 disc is loaded, the unit will take longer time to read the initial data.

 A DVD that does not match the region code cannot be read by this appliance.

 If a disc contains mixed content (e.g. MP3 and video files), the appliance will only recognise, list

and play one content type.

Using the PROGRAM function

 Press the PROGRAM button (6) to enter the PROGRAM function.

 Press the digit buttons (2) to select a desired track, and use the arrow button down (11) to

highlight the next entry.

 To confirm the selection and start the program, move the highlight to "START" and press the

ENTER (27) button.

 To stop the program, press the PROGRAM button (6) and press ENTER (27).

Akai AMN250UC User Manual

Questions and Answers: