USB functions
Insert the USB device in the slot . The device can only be connected one way.
To select the source mode DVD, press the SOURCE button (22).
Press the USB/ MEMORY CARD button (14).
Memory card functions
Insert the SD/MMC device in the slot. The device can only be connected one way.
To select the source mode DVD, press the SOURCE button (22).
Press the USB/ MEMORY CARD button (14).
After the device has been connected, a content menu will display on the TV screen.
Press the arrow button (11)(up and down) to select a folder or a file.
Press the ENTER button (27) to enter the selected folder or file. You can also use the digit
buttons (2) to select a folder or to play the file.
Press the arrow button (11)(up and down) to select a folder or a file.
Press ENTER (27) to confirm.
Press the MENU button (28) to return to the content menu during playback.
During playback, the following functions are available:
To select a track, press the PREV button (25) or the NEXT button (24) until the desired track is
set.
To pause playback, press the PLAY/PAUSE button (18) once; to resume playback, press the
button again.
To stop playback, press the STOP button (32).
To remove the device, gently pull it out of the slot.
Due to the great variety of products with USB ports and their sometimes quite manufacturer-specific
functions we can neither guarantee that all devices will be recognised, nor that all operating options
that are possible in theory will actually work.
To Next Page
Loading...
Need help?
General
