10
To solo a track:
1. Press and hold Shift and press the second Scene Launch Button (Solo). This
puts the Clip Stop Buttons at the bottom of the 8x8 matrix of Clip Buttons in
Solo Mode.
2. Press the Clip Stop Button in the same column as the track you want to solo.
To mute a track:
1. Press and hold Shift and press the third Scene Launch Button (Mute). This
puts the Clip Stop Buttons at the bottom of the 8x8 matrix of Clip Buttons in
Mute Mode.
2. Press the Clip Stop Button in the same column as the track you want to mute.
To record-arm a track:
1. Press and hold Shift and press the fourth Scene Launch Button (Rec Arm).
This puts the Clip Stop Buttons at the bottom of the 8x8 matrix of Clip Buttons
in Record-Arm Mode.
2. Press the Clip Stop Button in the same column as the track you want to
record-arm.
To select a track:
1. Press and hold Shift and press the fifth Scene Launch Button (Select). This
puts the Clip Stop Buttons at the bottom of the 8x8 matrix of Clip Buttons in
Select Mode.
2. Press the Clip Stop Button in the same column as the track you want to
select.
To Next Page
Loading...
Need help?
General
