Akai APC40MKII User Manual

SPECIFICATIONS
Technical Specification
Technical SpecificationTechnical Specification
Technical Specification
Knobs
8
360° track pan/send/assignable knobs
8 360° device control knobs
1 360° cue level knob
1 360° tempo knob
Clip Launch Buttons
40
backlit RGB buttons in a 8x5 matrix
5 scene launch buttons
Faders
8
45mm track volume faders
1 45mm master volume fader
1 45mm crossfader
Inputs / Outputs
1 USB port
1 1/4" (6.35mm) TS jack for footswitch input
Power
USB-bus-powered
Dimensions
(width x depth x height; no cable)
16.7" x 10.0" x 1.8"
42.4 cm x 25.4 cm x 4.6 cm
Weight
(no cable)
3.97 lbs.
1.8 kg
SERVICE MANUAL
MODEL:APC40MKII

Akai APC40MKII Specifications

General

Brand	Akai
Model	APC40MKII
Category	Recording Equipment
Language	English

Summary

Specifications

Disassembly Procedures

Disassemble Bottom Panel

Disassemble Main PCB Assembly

Top Panel Disassembly

Remove Knobs and Faders

Remove Nuts and Washers

Remove Screws

Remove Cables

Wiring Diagram

Bill of Materials (BOM)

Test Procedures

Knob Test

Procedure to test the device's knobs, verifying movement and LED feedback.

Button Test

Procedure to test the device's buttons, verifying press and LED feedback.

Pad / Soft button Test

Procedure to test pad/soft buttons, verifying press and LED feedback.

Encoder Test

Procedure to test Tempo and Cue Level encoders, verifying movement and feedback.

Slider Test

Procedure to test the device's sliders, verifying range of motion and feedback.

Footswitch Test

Main PCB Schematic

Top Panel PCB Schematic

Switch Enable Lines Diagram

ADA5 Control PCB Diagram